 |
|
To find out more about our tips on Motorcycle Maintenance, click here.
|
|
 |
|
|
 |
 |
|
|
- New profile design with more tread volume (greater land/sea ratio) in the shoulders for excellent cornering grip and a more open center-tread area for straight-line grip.
- Recessed biting edges in shoulder tread blocks yield more traction for greater grip, especially in corners and ruts, throughout a wide range of terrain conditions.
- Chiseled shoulder block shape improves side traction and makes traversing ruts easier. This tapered shape facilitates knob penetration through soft surfaces, whereas a flat knob would ”float” and/or be deflected. Instead, the tapered knob penetrates into the firmer underlying ground to give the tire more bite for more traction.
- Tie-bar design connects and reinforces the tread blocks for greater tread stiffness, yielding improved intermediate-to-hard terrain performance.
- Recess design in the area between tread blocks gives the tire improved compliance for enhanced ride comfort.
|
| SIZE |
LOAD/ SPEED INDEX |
SIDEWALL |
PART # |
APPLICABLE RIMS
RECOMMENDED RIM |
OVERALL DIAMETER |
OVERALL WIDTH |
FULL TREAD DEPTH |
MAXIMUM LOAD @ PSI |
|
| GEOMAX MX51 FRONT |
| 2.50-10 |
33J |
|
32CS17 |
1.50 |
15.08 |
2.76 |
10/32 |
|
| 2.50-12 |
39J |
|
32CS18 |
1.50 |
17.17 |
2.80 |
10/32 |
|
| 60/100-14 |
30M |
|
32CS15 |
1.40 |
18.94 |
2.80 |
12/32 |
|
| 70/100-17 |
40M |
|
32CS11 |
1.40 |
22.87 |
3.27 |
13/32 |
|
| 70/100-19 |
42M |
|
32CS13 |
1.40 |
24.88 |
3.23 |
13/32 |
|
| 80/100-21 |
51M |
|
32CS01 |
1.60 |
27.87 |
3.66 |
15/32 |
|
| 90/100-21 |
57M |
|
32CS02 |
1.60 |
28.03 |
3.86 |
15/32 |
|
| GEOMAX MX51 REAR |
| 2.75-10 |
38J |
|
32CS19 |
1.50 |
15.39 |
2.99 |
11/32 |
|
| 80/100-12 |
41M |
|
32CS16 |
1.60 |
18.39 |
3.66 |
15/32 |
|
| 90/100-14 |
49M |
|
32CS12 |
1.60 |
21.42 |
4.13 |
16/32 |
|
| 90/100-16 |
52M |
|
32CS14 |
1.85 |
23.50 |
4.21 |
17/32 |
|
| 110/90-18 |
61M |
|
32CS05 |
1.85 |
26.14 |
4.80 |
20/32 |
|
| 120/90-18 |
65M |
|
32CS06 |
2.15 |
26.85 |
5.20 |
20/32 |
|
| 100/100-18 |
59M |
|
32CS09 |
1.85 |
26.30 |
4.61 |
20/32 |
|
| 110/100-18 |
64M |
|
32CS10 |
2.15 |
27.09 |
5.00 |
21/32 |
|
| 100/90-19 |
57M |
|
32CS07 |
1.85 |
26.46 |
4.65 |
20/32 |
|
| 110/80-19 |
59M |
|
32CS03 |
1.85 |
26.73 |
4.96 |
20/32 |
|
| 110/90-19 |
62M |
|
32CS08 |
2.15 |
27.13 |
5.04 |
20/32 |
|
| 120/80-19 |
63M |
|
32CS04 |
2.15 |
27.13 |
5.12 |
20/32 |
|
|
|
Follow Dunlop Tire Application Guide. For general motorcycle tire service information and important safety guidelines click here. You may also contact Dunlop directly at (800) 845-8378 or fill out our contact form.
|
|
